Air-drying 2-pack high-solids filler

Non-toxic, odourless and non-flammable. Base coat and sealant.

Suitable for metal, concrete, fibreglass and wood.

Colours

Available in light grey only.

Uses

This is a very dense, viscous product that can be used as a sealant, base coat and filler for fabrications and structures designed for various purposes.

It finds application in various business sectors: structural steel fabrication, agriculture, petrochemical, construction, marine and aviation.

It can be used to replace missing portions of a casting or machined/processed part, strengthen the bond between different materials or seal cracks in masonry.

Performance

This is a product with high technical content, guaranteed to provide:

• adhesion to a variety of materials
• extremely high chemical resistance
• exceptional hardness
• versatility and low environmental impact

Treatment of surfaces to be coated

Where possible, surfaces should be clean and, above all, be free from dirt, grease, moisture and salt efflorescence.

It’s important to make sure, where possible, that the item is sufficiently sound and undamaged.

Application

This product has an extremely high level of viscosity and should be trowelled or poured on only.

Using a trowel, the product can be applied on vertical surfaces to a thickness of up to 5 mm without sag.

If poured, the filling can be several centimetres thick.

It dries very slowly, in approx. 10-12 hours at ambient temperature.

It cannot be overcoated or sanded.