Air-drying 1-pack enamel finish for metal.

Excellent for exposure outdoors, sun and weather resistant.

Anticorrosive, very hard and flexible.

Colours

Custom colours available in any shade, including colours with a very high gloss level.

Uses

Highly prestigious finish used in coating tools and industrial, agricultural and textile machinery.

Applications in chemical and power plants, for piping, valves, structures, stairs and other fabrications.

The brightest, high-gloss versions have been chosen for restoring cars, motorcycles and military vehicles.

Excellent finish for household objects or sports equipment.

Performance

This is a premium product featuring:

• excellent adhesion and elasticity
• sun, rain and general weather resistance
• good anticorrosive properties
• remarkable gloss and attractive aesthetic appearance

Treatment of surfaces to be coated

To promote optimum adhesion, it’s important to clean the surface, removing all traces of dirt, grease or residual machining swarf.

If the metal to be coated has a shiny, reflective surface, it’s best to start by abrasive blasting or sanding.

Application

For best results in terms of aesthetic appearance, this finish should be applied by spraying. The spraying equipment required consists in a traditional airmix or airless spray gun, nozzles measuring between 1.2 and 1.7 mm and an air pressure of 3-4 bar.

The thickness of the film to be applied is in the range from 30 to 50 microns. At this thickness, the film applied air-dries at ambient temperature in approx. 40 minutes.

It can also be applied by roller or brush, provided care is taken to apply the coating evenly, although the final finish will of course be of a lower standard.